2014 Infiniti QX60 - Lane Departure Warning (LDW) and Lane Departure Prevention (LDP)

4,363 views · Published 29 July 2013 · 1:47 · Indexed 20 September 2026

Channel: INFINITI USA · 2013 · Autos & Vehicles

Watch on YouTube

The Lane Departure Warning (or LDW) and Lane Departure Prevention (or LDP) systems, if so equipped, are activated at speeds of approximately 45 miles-per-hour and above. These systems monitor the lane markers on the traveling lane using a camera unit located in front of the inside mirror. 

The LDW system is activated when the camera detects that the vehicle is approaching the left or the right side of the traveling lane. A blinking Lane Departure Warning indicator light appears in the instrument panel and a warning chime sounds. 

The LDP system is activated by the same conditions as the LDW system. In addition to alerting the driver with a warning chime and the Lane Departure Warning indicator light in the instrument panel, the system automatically applies the brakes briefly on the appropriate side of the vehicle to help return the vehicle back to the traveling lane.
 
To enable or disable the LDW or LDP systems:

• Press this button on the left side of the steering wheel until SETTINGS is shown on the vehicle information display,
• Use these switches to select DRIVER ASSISTANCE then press the ENTER button on the steering wheel,
• Select DRIVER AIDS,
• Select LANE, then
• Highlight LDW or LDP and then press the ENTER button on the steering wheel to toggle the corresponding feature on or off.

Once enabled, the LDP system can be activated by pushing the Dynamic Driver Assistance switch on the right side of the steering wheel.

Please see your Owner's Manual for important safety information, system limitations and additional operating information.

More from this channel