2016 Infiniti QX70 - Power Moonroof

817 views · Published 17 June 2015 · 1:44 · Indexed 10 November 2026

Channel: INFINITI USA · 2015 · Autos & Vehicles

Watch on YouTube

"To operate the power moonroof, place the ignition in the ON position.

To open or close the moonroof, push the OPEN or CLOSE side of this switch and release it.

To partially open or close the moonroof, push the switch in either direction while it’s moving.

To tilt the moonroof up, first close the moonroof then push the switch to the TILT UP position and release it.
 

To tilt it down, push the switch to the TILT DOWN position and release it.

The sunshade opens automatically when the moonroof is opened. To close the sunshade, slide it forward.

If you’ve turned the ignition OFF and notice the moonroof is open, you still have a period of time in which to close it. However, if either front door is opened during that period, power to the moonroof is cancelled.

If the moonroof does not operate properly, perform the following procedure to initialize the moonroof:
1. Place the ignition in the ON position.
2. If the moonroof is open, close it fully by repeatedly pushing the CLOSE side of the moonroof switch.
3. Push and hold the CLOSE side of the moonroof switch to tilt the moonroof up.
4. Release the moonroof switch after the moonroof moves slightly up and down.
5. Push and hold the OPEN side of the moonroof switch to fully tilt the moonroof down.
6. Check if the moonroof switch operates normally. If it doesn’t operate normally, see your Infiniti retailer for service.

Please see your Owner’s Manual for important safety information, system limitations and additional operating information.

"

More from this channel