2015 Infiniti QX80 - Blind Spot Warning (BSW) and Blind Spot Intervention® (BSI) Systems

3,211 views · Published 1 October 2014 · 2:39 · Indexed 26 October 2026

Channel: INFINITI USA · 2014 · Autos & Vehicles

Watch on YouTube

"The Blind Spot Warning (BSW) and Blind Spot Intervention (BSI) systems, if so equipped, can help alert the driver of other vehicles in the blind spot area when changing lanes.

The BSW system uses radar sensors installed near the rear bumper to help detect other vehicles in the blind spot area. In addition to the radar sensors, the BSI system uses a camera installed behind the windshield to monitor the lane markers of your traveling lane.

When the radar sensor detects vehicles in the detection zone and your vehicle is traveling at speeds greater than approximately 20 miles-per-hour, the Blind Spot Warning indicator inside the outside rearview mirrors illuminates. If the driver then activates the turn signal, the system chimes twice and the Blind Spot Warning indicator light will flash.

The BSI system is activated when it senses a vehicle in the detection zone, you are driving at speeds above approximately 37 miles-per-hour, and your vehicle is
 

approaching the lane marker. BSI operates regardless of turn signal usage. The system will chime three times and lightly apply the brakes for a period of time on one side to help return the vehicle back to the traveling lane.

The BSI system turns on when the dynamic driver assistance switch, on the steering wheel, is activated.

Blind Spot Intervention is ON when the green indicator light illuminates in the instrument panel.

BSI provides an audible warning and the indicator light flashes when the BSI is activated even if the BSW system is off.

There may be instances when you want to turn the BSW system OFF. You can turn the system OFF temporarily, by pushing the WARNING SYSTEMS switch on the lower left side of the instrument panel, its detector light will turn OFF.

To permanently enable or disable the BSW system:
● Press the SETTING button on the control panel.
● Select the DRIVER ASSISTANCE key.
● Select the DRIVER ASSISTANCE WARNINGS key, and then
● Select the BLIND SPOT WARNING key to toggle the BSW system on or off.

To permanently enable or disable the BSI system:
● Press the SETTING button on the control panel.
● Select the DRIVER ASSISTANCE key.
● Select the DYNAMIC ASSISTANCE SETTINGS key, and then
● Select the BLIND SPOT INTERVENTION key to toggle the BSI system on or off

Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
"

More from this channel