Clean an Engine & Use a Strong Light to find OIL LEAKS

1,148 views · Published 26 August 2015 · 4:15 · Indexed 28 October 2026

Channel: syyenergy7 · 2015 · Education

Watch on YouTube

Clean an Engine & Use a Strong Light to find OIL LEAKS.
It is sometimes very difficult to find the source of an engine oil leak.  The best way to find an engine oil leak is to first thoroughly clean the engine and remove all dirt, oil and grease.  Then start the engine and use a very powerful spotlight and see where the oil leak is coming from.  In this case the source of the oil leak was very difficult to determine.  After looking for the oil leak, while the engine was running, it appears that the oil leak is coming from a plug in the block that is behind the bracket that holds the alternator and A/C compressor.  At least I can see that the oil leak is definitely not coming from the oil pan, the oil filter housing or the oil pressure switch sending unit.  Using this method to find the oil leak can save a lot of time, because you will not be buying and changing gaskets that do not need to be replaced.  Even though I am still not 100% sure exactly where the oil leak is, I know definitely where the oil leak in not coming from.  Plus I pinpointed the source of oil leak to a very small area in the engine.  The next step is to fix the oil leak and that requires pulling the alternator bracket.  That is not an easy job to do on the Chrysler Sebring convertible.

Clean an Engine & Use a Strong Light to find OIL LEAKS 
http://www.youtubeMHQnTb2_ps

Remove Stubborn Block Oil Plug - How to 
http://www.youtube.com/watch?v=PAzjW_ZKRbY

Special Thread Sealanf for special Car applications 
http://www.youtube.com/watch?v=J_vVCgkyAb0

More from this channel