2014 Infiniti Q70 - HomeLink® Universal Transceiver

962 views · Published 20 December 2013 · 2:02 · Indexed 8 November 2026

Channel: INFINITI USA · 2013 · Autos & Vehicles

Watch on YouTube

"Your HomeLink® Universal Transceiver's control buttons are located along the bottom of your rearview mirror. The system can consolidate the functions of various individual hand-held transmitters to replace devices that operate garage doors, gates, lights or security alarms. HomeLink® is powered by your INFINITI vehicle's battery and requires no other power source. 

Remember that you'll need all of your hand-held transmitters, such as your garage door opener, to successfully program HomeLink®. 

To get started, clear the memory by pressing and holding the two outer HomeLink® buttons for approximately 10 seconds. When the indicator light begins to blink, release both buttons. 

Now you are ready to program. 

To begin programming, position the hand-held transmitter 1 to 3 inches away from the HomeLink® surface. 

Now, using both hands, simultaneously press and hold both the Homelink® button you want to program and the hand-held transmitter button until the indicator light flashes, changing from a slow blink to a rapid blink. 

When the indicator light flashes rapidly, both buttons may be released. The rapidly flashing light indicates that the device has been successfully programmed. 

To activate a programmed device, press and hold the programmed HomeLink® button. If the indicator light is solid, training is complete and your device should activate when the HomeLink® button is pressed and released. 

If the indicator light blinks rapidly for 2 seconds and then turns to a solid light, there are additional steps required to program your device. See your Owner's Manual for more information. 

If you have any questions or are having difficulty programming your HomeLink® buttons, please refer to the HomeLink® website at www.homelink.com or call 1-800-355-3515. 


"

More from this channel