Q-multiplier improves crystal set reception - Part 2 MF band scan & HF SSB reception
4,061 views · Published 11 July 2016 · 49:52 · Indexed 1 November 2026
Channel: Amateur Radio VK3YE · 2016 · Science & Technology
Another look at the Q multiplier crystal set. Here I've added a 1 transistor audio amplifier (BC548 transistor, 220k resistor, 4.7k resistor, 2 x 4.7 uF capacitors) and am listening on a different amplifier. I do a band scan of the MW broadcast band then tap down the coil to allow higher frequency reception. Signals at 2.4 MHz are heard from the Northern Territory and then SSB amateurs on 3.5 MHz. PS: If you liked this video please consider supporting Amateur Radio VK3YE by: * Subscribing on YouTube, * Checking my books page at https://books.vk3ye.com * Shopping on Amazon via: https://amzn.to/3iiDQXv, or * Shopping on eBay via: https://ebay.us/i9DuWP (then if you buy something I'll get a small commission at no cost to you)
More from this channel
-
0:41
160 metres AM from Koornang Park: VK3AX on air
-
2:20
Cup Day 160m AM: Net roll call
-
3:01
Cup Day 160m AM: Signal reports from VK3AX
-
3:00
Melbourne Cup Day 2008 160m AM: Some portable station signals
-
1:57
160m from the park
-
9:45
The AM broadcast band at night
-
4:39
160 metres to CB receive converter testing
-
1:54
160 metres AM: receiving comparison between loop and tee vertical antennas