2015 Infiniti Q70 HEV - Power Moonroof

235 views · Published 29 September 2014 · 1:49 · Indexed 31 October 2026

Channel: INFINITI USA · 2014 · Autos & Vehicles

Watch on YouTube

"To operate the power moonroof, place the ignition in the ON position.

To open or close the moonroof, push this switch toward the OPEN or Closed position, and release it. You do not need to hold it.

To partially open or close the moonroof, push the switch in either direction while it is moving.

To tilt the moonroof up, first close the moonroof then push the switch to the TILT UP position and release it.

To tilt it down, push the switch to the TILT DOWN position.

Open and close the sunshade by sliding it forward or backwards. If you’ve turned the ignition OFF and notice the moonroof is open, you still have a period of time in which to close it. However, if either front door is opened during that period, power to the moonroof is cancelled.

If the moonroof does not operate properly, perform the following procedure to initialize the moonroof:
1. Turn ignition switch ON.
2. If the moonroof is open, close it fully by repeatedly pushing the moonroof switch to the close position to tilt the moonroof up.
3. Push and hold the switch to the close position.
4. Release the moonroof switch after the moonroof moves slightly up and down.
5. Push and hold the switch to the open position to fully tilt the moonroof down.
6. Check if the moonroof switch operates normally. Initialization is complete if the moonroof operates properly.
 

If the moonroof doesn’t operate normally, see your Infiniti retailer for service.

Please see your Owner’s Manual for important safety information, system limitations and additional operating information.

"

More from this channel