2014 Infiniti Q50 HEV - Conventional Cruise Control (Fixed Speed)

432 views · Published 13 August 2013 · 2:10 · Indexed 22 October 2026

Channel: INFINITI USA · 2013 · Autos & Vehicles

Watch on YouTube

Cruise Control enables you to set a desired speed between 25 and 90 miles per hour -- and remain there until you wish to slow down, accelerate or stop.

The method for turning on the conventional cruise control differs depending on whether or not your vehicle is equipped with Intelligent Cruise Control or (ICC). 

If you have the ICC system, turn on the conventional fixed-speed cruise control by pushing and holding the steering wheel MAIN switch for longer than approximately 1.5 seconds.

If you do not have the ICC system, push the MAIN switch on the right side of the steering wheel and the gray CRUISE indicator light will illuminate. Accelerate until you reach the desired speed. Then push down on the SET switch and release it. The green CRUISE SET indicator light will illuminate and the vehicle will operate at your selected speed.

If you need to pass another vehicle, assure that it is a legal maneuver, then press the accelerator pedal. Once you have safely passed, release the accelerator and your vehicle will return to the previously set speed.

To change to a faster cruising speed, push UP and hold the RESUME switch. Release at your desired cruising speed. If you push and quickly release this switch, each push will increase your set speed by about one mile per hour.

To reset at a slower cruising speed, push DOWN and hold the SET switch. Release when you have reached the desired slower speed. If you push and quickly release this switch, each push will decrease your set speed by about one mile per hour.

To cancel Cruise Control, push CANCEL or tap your brake pedal. The green CRUISE SET indicator light changes to the gray CRUISE indicator light.

To resume cruising at your last set speed, push UP on the RESUME switch. 

To turn Cruise Control OFF completely, push the ON/OFF switch.

Please see your Owner's Manual for important safety information, system limitations and additional operating information.

More from this channel