Flatland Skiplate Installation and Review for Yamaha WR250R
1,692 views · Published 4 August 2016 · 5:15 · Indexed 29 October 2026
Channel: AdventureswithMe · 2016 · Autos & Vehicles
I just picked up a Flatland skidplate for the WR250R and wanted to share the installation experience. You have a couple of options: 1) just remove the plastic side covers with an 8mm socket and install the new Flatland skidplate with an allen wrench. Installation time: 15 min. or less 2) get some insulating material to put between the frame and the skidplate to cut down on any metal-to-metal clatter. Elongate the bottom bolt holes a few mm to compensate for the added clearance between the frame and the skidplate. Get a couple of longer bolts (M6-1.0x30mm) to get the skiplate started and cinched up to the frame. Then use the supplied Flatland bolts to finish the job. Installation time: 35 minutes You might want to try the skidplate without the insulation. I've read online that some people have had too much clatter, so it was worth the extra effort to me. The result is outstanding. The skiplate is very sturdy and looks great. There's no clatter at all with the insulating strips.
More from this channel
-
2:09
Journey To Woodstock, 2008
-
3:19
VFRD Western Mass Ride, June 14, 2008
-
1:00
Joining the 200 Kilometer/Hour Club
-
0:40
KLR and GS1200 on a Class IV Road in Vermont
-
2:48
Secura F.I.V. Steering Wheel for Vintage Volkswagen
-
7:07
My 2005 Motorcycle Year in Review
-
1:22
Cutting Grass with Daddy
-
0:36
Bartonsville Covered Bridge Site After the Flood