Look Who it Was Random video

2014 Infiniti Q70 - Power Windows

380 views · Published 20 December 2013 · 2:19 · Indexed 10 November 2026

Channel: INFINITI USA · 2013 · Autos & Vehicles

Watch on YouTube

"The power windows function when the ignition switch is placed in the ON position and for a short time after the vehicle is turned off. The power is immediately canceled if the driver's door is opened after the ignition switch is placed in the OFF position. 

Available on the driver's side is the power window control panel that operates the front and rear passenger windows. Tapping the driver's window switch lightly will partially open the window. To close the window, pull the switch up until the desired window position is reached. 

To lock passenger's windows, depress the window lock button. Press it a second time to cancel the function. 

The front and rear passenger's power window control operates only the corresponding passenger's window. To open the window partially, push the switch down lightly until the desired window position is reached. To close the window partially, pull the switch up until the desired window position is reached. To fully open a window, push the window switch down then release it. The window will completely open. To halt the process, lift the switch up while the window is opening. To close a window, pull the switch up and release it. The window will automatically close. To stop the operation, push the switch down while the window is closing. 

If the control unit detects that there's something caught in the window as it's closing, the window will automatically be immediately lowered. 

If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 

1. Push the ignition switch to the ON position. 
2. Close the door. 
3. Open the window completely by operating the power window switch. 
4. Pull the power window switch up and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 
5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 
6. Perform steps 2 through 5 above for other windows. 

If the power window automatic function does not operate properly after performing the procedure, have your vehicle checked by an INFINITI retailer. 


"

More from this channel