Fixes for your Angle GRINDER, How to

899 views · Published 22 July 2017 · 9:29 · Indexed 12 November 2026

Channel: syyenergy7 · 2017 · Education

Watch on YouTube

Fixes for your Angle GRINDER, How to.
When you are using an angle-grinder you are often exposing it to a lot of dust and dirt that can sometimes cause the brushes and armature to get so dirty that the angle grinder will stop working.  Usually, i can just clean off the armature with some fine emery paper and spray electromotive cleaner on the brushes and blow out all the dirt with air.     In this case I has to actually take out both of the brushes and clean them with emery paper before the angle-grinder started working like new again.  i figure quite a few people don't know this simple fix and will often just buy a new angle grinder because they are cheap to buy.  If your angle grinder seems like it has less power than when it was new, this likely will be the fix too.
   Another small common problem with angle grinders is that you can often lose the rubber pad so you can lay the angle grinder down and not mar or chip the paint.  Here I installed a piece of an old tire to the back of the angle grinder so the angle grinder can be laid down on a painted surface and not chip the paint or mar the paint. 
   The most important safety item with an angle grinder is googles or a face shield.  i found the best way to clean, preserve and lengthen the life of a face shield and also to keep it clear like new, is to clean the face shield with 'Awesome' cleaner and then use a good coat of furniture polish,.   The furniture polish will often remove minor scratches and haze and make the face shield almost crystal clear like new again.

More from this channel