2016 Infiniti QX60 HEV- Power Liftgate

497 views · Published 1 March 2016 · 1:42 · Indexed 1 November 2026

Channel: INFINITI USA · 2016 · Autos & Vehicles

Watch on YouTube

"This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.



Your vehicle is equipped with a power liftgate. To operate the power liftgate, the shift lever must be in PARK.

Use one of the following methods to open or close the power liftgate:
● Push the POWER LIFTGATE switch on the instrument panel,
● Press and hold the POWER LIFTGATE button on the Intelligent Key, or
● Push the liftgate OPENER switch on the liftgate.

The hazard lights flash and a chime sounds. The liftgate will open even if the doors are locked, when you use the instrument panel switch or the POWER LIFTGATE button on the Intelligent Key.

The liftgate can be set to open to a specific height by performing the following:
● Open the liftgate using the request switch or the Intelligent Key.
● Pull the liftgate down to the desired position and hold.
● While holding the liftgate in position, press and hold the liftgate switch located on the liftgate for a period of time or until 3 beeps are heard.

After the beeps are heard, the liftgate will only open to the selected position setting. To reset to a different position, repeat this procedure.

You’ll find the POWER LIFTGATE MAIN switch on your instrument panel.

When this switch is in the OFF position, the liftgate OPENER switch and the POWER LIFTGATE switch on the liftgate will not operate.

If the vehicle battery is discharged and the power liftgate cannot be opened, remove this cover at the bottom of the inside of the liftgate. Beneath the cover is a lever. Move it to the right to open the liftgate.

Please see your Owner’s Manual for important safety information, system limitations and additional operating information.

"

More from this channel