Look Who it Was Random video

2014 Infiniti QX60 HEV - Push Button Ignition

2,129 views · Published 31 October 2013 · 1:53 · Indexed 24 October 2026

Channel: INFINITI USA · 2013 · Autos & Vehicles

Watch on YouTube

"To start the engine, place the shift lever in Park, press the brake pedal, and then push the ignition switch. 

To stop the engine, move the shift lever to the Park position and push the ignition switch to the OFF position.

Pushing the ignition switch once, without applying the foot brake, will place the vehicle in ACC mode. When the ignition switch is pushed a second time, it will change to ON and a third time returns the ignition switch to OFF.

If the ignition is left in the ACC or ON position, various systems in the vehicle can discharge the battery and your vehicle may not start.

Allow the engine to idle for at least 30 seconds after starting. Do not race the engine while warming it up. Drive at a moderate speed for a short distance, especially in cold weather. During cold weather, allow the engine to run for a minimum of 2 - 3 minutes before shutting it off. Starting and stopping the engine over a short period of time may make the vehicle more difficult to start.

When leaving the vehicle, make sure that the ignition switch is placed in the LOCK position and that you take the Intelligent Key® with you. As a precaution, if the driver's door is open while the ignition switch is in the ACC or ON position, a chime will sound.

If the Intelligent Key battery is discharged and you need to start the engine:

• First make sure the shift lever is in the Park position,
• Then touch the ignition switch with the Intelligent Key® and a chime will sound. 
• Within 10 seconds of hearing the chime, apply the brake pedal, push the ignition switch and the engine will start. 
• If the brake pedal is not applied when the ignition switch is pressed, the ignition position changes to ACC.

Please see your Owner's Manual for more information on push button ignition switch operations."

More from this channel