solar charge your 18v nicad battery with a 4.5volt solar panel
2,589 views · Published 14 April 2017 · 4:07 · Indexed 28 October 2026
Channel: Not rocket science · 2017 · Science & Technology
Do this at your own risk. Even a small 4.5 volt 1 1/2w solar panel can give a 18v nicad battery pack a booster charge. It won't fully charge your 18v battery unless you get 24 hours of sunlight. All you need is an inexpensive dc to dc booster board that costs around $1.69 on eBay. Solder the solar panel output to the input of the board and set the voltage to around 23 v. The output of the board connects with the battery terminals of the battery pack. Open voltage of a 4.5v solar panel is about 6 v, which is sufficient activate the board. Do not attempt to do this with a lithium battery pack as the charging requirements for lithium cells are more stringent for safety reasons. I also made a plastic bare wire connector/protector for the battery terminals as sometimes you might not have the push on connectors. The home 3D printer is perfect for this job as it's a small plastic part and does not require a long time to print. Click here to subscribe to this channel: http://www.youtube.com/subscription_center?add_user=wtam69
More from this channel
-
1:49
13 w broken cell solar panel.AVI
-
2:52
Wind solar and LED lighting updates.wmv
-
3:30
AC DC solar adaptable AA battery charger.AVI
-
2:50
Mini gen's first wings.mp4
-
6:17
Youtube stabilized version of my mini gen horizontal windmill video
-
2:33
Small axial flux alternator, pt. 3 - test wings added.mp4
-
3:45
Small 6 coil axial flux vawt, pt. 4 .mp4
-
1:15
90 degree weather and hail in NYC.mp4