Repairing Chicago Electric 6 inch cutoff saw item 41453
2,484 views · Published 10 July 2018 · 3:16 · Indexed 20 November 2026
Channel: Not rocket science · 2018 · Science & Technology
Do this at your own risk. My Chicago Electric 6 inch cutoff saw worked intermittently and then one day it stopped working completely. I suspected the problem to be worn carbon brushes. When I took the brushes out, they didn't look too worn so I discounted that as a problem. My next suspicion was maybe the on/off switch, or maybe a fuse inside the saw to be the problem. Before I took the saw apart, I thought I needed to look at the manual for other causes of malfunction. I found the manual online and it suggested wiping the brushes with a pencil eraser. That was worth a try since I had not done that. The manual did not say "clean with alcohol" as mentioned in the video. Instead of cleaning with eraser, I thought i might try cleaning the brushes and commutator with a Q tip slightly moistened with alcohol. This is not the recommended maintenance but it worked for me. The cutoff saw is working once again with the old brushes and commutator cleaned. The motor turns on 100 % of the time. Since the old brushes are working fine, I'll save the replacement brushes until the old ones are actually worn out and unserviceable. I suspect similar Harbor Freight tools like grinders and such would eventually experience this malfunction and can be brought back to life with a simple cleaning. Click here to subscribe to this channel: http://www.youtube.com/subscription_center?add_user=wtam69
More from this channel
-
1:49
13 w broken cell solar panel.AVI
-
2:52
Wind solar and LED lighting updates.wmv
-
3:30
AC DC solar adaptable AA battery charger.AVI
-
2:50
Mini gen's first wings.mp4
-
6:17
Youtube stabilized version of my mini gen horizontal windmill video
-
2:33
Small axial flux alternator, pt. 3 - test wings added.mp4
-
3:45
Small 6 coil axial flux vawt, pt. 4 .mp4
-
1:15
90 degree weather and hail in NYC.mp4