Assembling BelgradeMachine's vawt: Magnet rotors and stator part 2

720 views · Published 16 July 2015 · 7:02 · Indexed 16 November 2026

Channel: Not rocket science · 2015 · Science & Technology

Watch on YouTube

Disclaimer: This is not a tutorial. Neo magnets can cause serious injuries if mishandled. Do this at your own risk.
  Belgrade Machine vertical turbine assembly and Goofywind's stator together make a sturdy and workable wind turbine.  The stator has 9 coils and this is matched to a set of 24 one inch square  1/2 inch thick magnets. I made a jig as a spacer for laying down the magnets. The spacer is needed to prevent the magnets from snapping together. After putting down the first few magnets using JB Weld epoxy, it seemed that the magnets could stay in place without sliding over and snapping together with the next magnet. 
 After the glueing down the magnets, I spray painted the rotors and magnet with enamel paint.  Obviously, using fiberglas to secure the magnets would be a better way. 
  I was hoping for a vertical wind turbine that can operate at low rpm. This seems to fit the bill. Will have some quick measurements in the next video.
  I followed Belgrade's video on stalling the second rotor. I was able to safely lower the second magnet plate using the jacking bolts that came with the kit. 
  This is not a project for children as the magnets have tremendous pull force. 
Click here to see BelgradeMachine's video on how this turbine work:
https://youtu.be/m4JQQjvhn_k

Click here to subscribe to this channel: http://www.youtube.com/subscription_center?add_user=wtam69

More from this channel