Do it yourself boom box update Part 7

1,378 views · Published 16 June 2016 · 6:07 · Indexed 4 November 2026

Channel: Not rocket science · 2016 · Science & Technology

Watch on YouTube

DO THIS AT YOUR OWN RISK.

 I'm at the final stages of completing this project. It involves wiring all the disparate components together. It is slow going as you need to think at each step the best or suitable components to use and how to place and connect them. Since this is a blue tooth amplifier, the signal  strength is critical and a weak signal increases noise and causes drop outs. I soldered a piece of wire to the antenna chip and the signal is much better now.  
 I'm trying not to make the front of the box look too busy.  The electronics are hidden under the top cover and the front is mostly clean looking. I can see why it takes some people months to complete this kind of project. I guess the more effort you put into this the more enjoyment you'll get out of it.
  You can change the way the amplifier sounds by changing the resistors to increase or lower gain, add filtering capacitors to reduce noise etc.  The TPA 3116 D2 data sheet would be very helpful in this regard. I try not to mess with the default design, partly because I don't know any better and partly because I don't want to destroy the amp before I put the boom box together.

 The Dayton subwoofer and passive radiator are from Parts Express and the inexpensive coaxial speakers I found on eBay. The boom box is loud and clear and the bass is quite good. 
 All music from this video are from Youtube audio library.

Here is the playlist for this series of videos:  https://www.youtube.com/playlist?list=PLD-XgBT371GP7f8Yl4mstuMW_0Ep_X1r_

 Click here to subscribe to this channel: http://www.youtube.com/subscription_center?add_user=wtam69

More from this channel