Do it yourself 3 cell 18650 low voltage LED indicator light

3,931 views · Published 29 June 2016 · 7:56 · Indexed 30 October 2026

Channel: Not rocket science · 2016 · Science & Technology

Watch on YouTube

Do this at your own risk.
When attached to my 3 cell, 11.1 volt 18650 lithium ion battery pack, this red low voltage LED light will glow when the voltage of the pack drops below 9.7 volt. This will be a reminder to recharge the pack.  This will be especially useful for people who use lipo batteries in power tool in place of the original power packs. Overdischarge of lithium cells can cause premature battery failure and create a hazardous condition. 
 The simple circuit can be reconfigured if you want to change at what voltage the LED should start to glow.  It is easily adaptable to be a low voltage indicator for other types of battery by changing the value of the zener diode, the resistors and the type of LED used. The circuit draws no current on standby and minimal current when the LED is lit.
  This circuit does not disconnect your battery from the load in case of over discharge. For that, you need a BMS chip (Battery Management System).
 
 Click here to subscribe to this channel: http://www.youtube.com/subscription_center?add_user=wtam69

More from this channel