Frictionless filament feed for Prusa i3 3 D printers
660 views · Published 30 March 2017 · 7:12 · Indexed 30 October 2026
Channel: Not rocket science · 2017 · Science & Technology
On most 3D printers, the stock filament feeding mechanism does not turn smoothly causing the filament to get stuck at times while printing. I found myself tugging on the reel to give the filament more slack and make the printing easier. A variety of modifications can be found on Youtube to improve the feeding action of the filament. My work around is to lay the reel sideways, on top of a rotating platform, much like a lazy Susan. This makes the reel turn smoothly and without any effort. The result is less strain on the stepper motor and the nozzle feed mechanism. The filament stays inside the reel without getting tangled. You can buy the lazy Susan in Home Depot or on eBay. I made one by drilling a hole in a 1/4 in plywood and then inserting a small bolt through the wood. On the other side, I put a nut on the bolt and tightened it. Then I drill a hole in another piece of wood and put it on top of the bolt and nut. Add another nut to secure the top (but don't tightened all the way). You now have a platter that rotates freely. Put your filament reel on top and sideways and you're good to go. This setup costs a dollar or two for the nuts and bolts. Click here to subscribe to this channel: http://www.youtube.com/subscription_center?add_user=wtam69
More from this channel
-
1:49
13 w broken cell solar panel.AVI
-
2:52
Wind solar and LED lighting updates.wmv
-
3:30
AC DC solar adaptable AA battery charger.AVI
-
2:50
Mini gen's first wings.mp4
-
6:17
Youtube stabilized version of my mini gen horizontal windmill video
-
2:33
Small axial flux alternator, pt. 3 - test wings added.mp4
-
3:45
Small 6 coil axial flux vawt, pt. 4 .mp4
-
1:15
90 degree weather and hail in NYC.mp4