"2000w" M12980-1 MAC motor spinning up.

2,947 views · Published 28 May 2012 · 0:47 · Indexed 6 November 2026

Channel: neptronix · 2012 · Autos & Vehicles

Watch on YouTube

The 'big mac' spinning up on a cell_man 12FET.

Only the yellow and blue phase wires needed to be switched. The hall sensor colors are completely different than every eBike hub motor, but the pins match up so no wire swapping is required on the hall sensor.

2700rpm at 38.6V. 

8 turn MAC motor spins at 1600RPM on this voltage, so this is 41% faster per volt 
6 turn MAC motor spins at 2000RPM on this voltage. so this motor is 26% faster per volt.

70RPM per volt, versus the BMC 1500w motor's approx. 100rpm per volt
And versus 50RPM per volt for the motenergy 4201 brushless mars/eTek style motor.

Looks good so far.

More from this channel

• 0:52 '96 BMW 328is Idle hang problem below 3000RPM.

  neptronix

  4,170 views · 1 February 2010

• 3:54 Nexus Respirate - Out of Reach (Drumcoil Mix)

  neptronix

  64 views · 2 February 2010

• 4:47 Neptronix VS Camus - Eternal

  neptronix

  188 views · 2 February 2010

• 7:49 Nexus Respirate - Earth Bound Beams

  neptronix

  100 views · 2 February 2010

• 3:47 Neptronix - Artery

  neptronix

  110 views · 28 February 2010

• 0:29 Rev Hang issue below 3000RPM *after* golf tee mod.

  neptronix

  4,563 views · 22 April 2010

• 1:24 Cell_man 250w kit

  neptronix

  3,157 views · 19 January 2011

• 0:26 MAC motor, 26" wheel, 30amp infineon ( 38amp peak ) at 14S 5ah lipo ( 58v )

  neptronix

  3,637 views · 11 March 2011