The Spreadsheet That Came Out at Minus 0.134 Watts
1,090 views · Published 27 August 2009 · 10:25 · Indexed 26 October 2026
Channel: Aaron Murakami · 2009 · Science & Technology
A sample-by-sample power integration of the Rosemary Ainslie COP 17 circuit using the Tektronix TDS3054C, which captures 10,000 samples per channel across three channels. The waveform is exported and each sample's instantaneous wattage computed against the battery voltage at that moment, then averaged over 5,880 samples: the 555 timer comes out at minus 0.06578 W, the load at minus 0.0682 W, minus 0.13406 W in total. Temperatures are read at the same time, with the load and the 1 ohm resistor both sitting 0.8 C below a 25 C ambient while the timer feed resistor runs 8 C above it. Chapters 0:00 Three channels, ten thousand samples each 2:58 Trimming the sample window 5:24 Integrating watts per sample 8:19 Load running below ambient https://emediapress.com https://emediapress.com/energytimes Rosemary Ainslie COP 17 circuit, 2009 bench footage. Posted 2009-08-27.
More from this channel
-
2:04
Sampler of RDT Generation II — PATHS Mind Energetics
-
6:45
Signing Up for Project One World — PATHS Walkthrough
-
6:01
High Voltage Jumping Backwards Into a Diode Bank
-
3:38
The Positive Terminal Is Not Even Connected — Murakami-Gray
-
1:15
Ainslie Circuit: Oscillation in Resonance — Scope Footage
-
4:23
Pickup Coil Charges a Cap Above Battery Voltage — Ainslie
-
3:49
The Clean Ring Gives More Heat — Ainslie COP 17 Circuit
-
3:25
Ainslie Circuit: Oscillation That Never Settles at Zero