Ainslie MOSFET Self-Oscillates With the Timer Off
952 views · Published 30 August 2009 · 6:58 · Indexed 14 November 2026
Channel: Aaron Murakami · 2009 · Science & Technology
With the Rosemary Ainslie circuit running, both the positive and negative supply to the 555 timer are disconnected on camera and the MOSFET keeps oscillating; the gate wire is then pulled off pin 3 entirely and the self-oscillation continues. Draw on the shared shunt falls from about 1.5 mV to under 1 mV, taking the RMS-to-DC spread from roughly 2.8 times to about 7.5 times, and the load still produces heat. Chapters 0:00 One shunt reading load and timer 4:40 Timer supply disconnected 5:56 Gate wire pulled off pin 3 https://emediapress.com https://emediapress.com/energytimes Rosemary Ainslie COP 17 circuit, 2009 bench footage. Posted 2009-08-30.
More from this channel
-
2:04
Sampler of RDT Generation II — PATHS Mind Energetics
-
6:45
Signing Up for Project One World — PATHS Walkthrough
-
6:01
High Voltage Jumping Backwards Into a Diode Bank
-
3:38
The Positive Terminal Is Not Even Connected — Murakami-Gray
-
1:15
Ainslie Circuit: Oscillation in Resonance — Scope Footage
-
4:23
Pickup Coil Charges a Cap Above Battery Voltage — Ainslie
-
3:49
The Clean Ring Gives More Heat — Ainslie COP 17 Circuit
-
3:25
Ainslie Circuit: Oscillation That Never Settles at Zero